|
|
 |
| |
| |
 |
Pro Installer 4300 Foam Sealant is
a versatile grade of polyurethane foam
in an aerosol can used to fill, insulate
and reduce air infiltration, preventing
heat loss in a variety of applications.
One component
moisture-cure polyurethane foam sealant
with a (H)CFC
free propellant.
View PDF Documents: Tech
Data Sheet - Material
Safety Data Sheet |
|
| |
- Low pressure to help prevent
distortion of window frames.
- Paintable, moisture curing
- Fast application rate
- Excellent adhesion to most surfaces
- Temperature, water and chemical
resistant
- Contains no formaldehyde
- UL Classified
|
|
- For filling and insulating of
joints, cracks and cavities around
and between windows or doors
- Partition Walls with Ceilings
- Seams between chimneys, roof
protection, roof panels and wall
panels
- Through penetrations around cables,
pipes,
voids, foundation and plumbing
- Air sealing
|
|
| |
Meets CA-25-4
California Air Resource Board method 310
UL Classified
Class I rated
ASTM E 84
Flame Spread 5
Smoke Development 20
Packaging
12-24 fl oz can per case
Surface Preparation:
Surfaces should be dry, free from
dust and grease. Excellent adhesion
to concrete, masonry, stone, plaster,
wood, fiber cement and metals. Porous
surfaces should be pre-moistened
with a fine mist of water.
Joint Design:
Using the gun trigger and adjustment
screw can control the dispensed
volume of the foam. Joints and cavities
should only be filled up to 70%.
When filling deep holes and joints
the foam should be applied at short
intervals of 1-2 hours.
Color: Light Green
|
|
Properties:
|
|
| |
|
|
|
|
|
